See item details listed below graphic:

Item:

1. APC super race seats mouted to sliding tracks. These seats provide a lot of support and comfortable while cruising on the street. They also have a location on the seat back for the seat belts to come through the top section. Simpson quick relase cam-lock seat belt. One click and it is easy to release the belts.

2. Chris Alston 8-POINT ROLL CAGE,1-5/8X.134" Weld-in kit is made of 1-5/8 x .134" wall mild steel tubing. It includes a main hoop, cage sides, windshield brace, rear struts, side bars. The cage is tied into the frame providing a very stiff car. The drivers side has a swing out side bar to get in and out easy.

3. The factory ECM to control the motor is mounted in a easy to reach location. This is where you can easily change the chip if needed. You can also hook up your scan tools quickly without doing anything special. The computer is modified to accept larger injectors - this car is running Siemens/Delphi 55lbs injectors. The chip in the car is a good all around chip with great street maners.

4. Close looped factory type carpet in the front area. This also includes padding to cut down on noise and heat transfered through the floor boards.